How to Make a Solar Panel Step-by-Step
It is a proven fact that the sun is the ultimate source of energy and it is backed-up by scientist’s beliefs that it will still have the same energy four million years from now. With this information at hand, more and more people are now shifting to this energy source with the use of solar-powered panels.
Because of the rising economic turmoil and soaring energy bills, creating a solar panel for your household is a sure way to lessen your worries. This genius invention has proved that there is a better alternative for energy resources than what we are currently using.
Learning how to build a solar panel yourself is a matter of perseverance and the right tools and equipments. Also, there are a lot of factors that you should bear in mind as well before learning how to make a solar panel.
The most common and the least noticed is your location. If you’re located in the north part of the globe, for instance, then you should have your solar panel facing south to have a better access to sunlight, making it capture maximum solar energy possible.
The same factor should also be considered by people living in the south part. The solar panel should always face the direction where the sun is going to be, as high as possible to achieve maximum sunlight absorption.
How to Create Your Own Solar Panel
For the process, creating and installing this product might seem a very tedious project to do, it is. But with various sources with instructions and information on learning how to make a solar panel, creating one shouldn’t be a problem.
There are step-by-step processes that will provide you with exact instructions that you just need to follow. In connection, having necessary woodwork skill is a huge advantage, since the creation of solar panels would require attaching things and parts.
Before starting your project, you have to collect first the needed tools and parts that will be used. These tools and parts are available in your local hardware or home improvement stores. If, by any chance, those stores do not have the needed parts, you can always check online and visit websites that sell these items.
Nowadays, there are a lot of websites that offer reasonable prices for these items. Look for the one that is nearest your location to save on shipping and handling fees. Once all of the needed parts and tools have been acquired, then time to check and study your manuals on learning how to make a solar panel.
How To make A solar panel: The Very Basics
We will be discussing the easiest steps on learning how to make a solar panel. First, you have to apply the adhesive on the “bus strips” of the solar panels. In doing so, it will have the assurance that the connection is solid and at the same time, it will provide proper adherence when you attach the “tab ribbons” to the solar plates. After this, it is time to attach the solar panels to one another.
After all of the solar panels are connected and firmly attached, with the minimum silicone as needed, you have to place the solar panels onto the plywood board. After placing the solar panels to the plywood board, you will have 2 wires hanging from the solar panels.
In order to feed the wire through the plywood panel, you have to punch a hole through the wooden panel. After this is done, the gaps around the plywood panel holes should be sealed with silicone.
The next step is to create a casing for the solar panels, since they will be roofed by Plexiglas. This time, an abundant amount of silicone is needed and wood screws.
You need to attach the casing to the plywood board firmly and see to it that it is waterproof. Before placing the Plexiglas into the case, to prevent cracking, be sure to drill screw holes first on to the Plexiglas.
Once the screw holes are placed, you can now attach the Plexiglas onto the frame using silicone and screws, with the silicone first before the screws.
After attaching the Plexiglas onto the frame, it is now time to check for gaps in the solar panels. Every corner and sidings of the panel should be considered because moisture can enter through those gaps.
Close up any holes that you can find using silicone, no matter how tiny it is. However, it doesn’t matter how firm you seal your panels, dampness will still build up inside the interiors. This is for the reason that the heat from the sun will eventually cause the moisture inside, especially in a cold weather or climate.
To avoid moisture build up inside, all you have to do is punch a small hole at the underneath the panel, just be sure to have it in a distance from the wirings. The hole will let air course inside the panel thus reducing the dampness build up. Also, putting the exhaust at the foot will prevent rainwater from getting inside the panel.
These are easy to follow instructions that in return, will save you a fortune with your electric bill. Not only that, you will also have your share in saving the planet by using this very innovative and useful invention.